Network Working Group P. Hallam-Baker Internet-Draft Comodo Group Inc. Intended status: Informational March 8, 2016 Expires: September 9, 2016 Title draft-hallambaker-jsonbcd-05 Abstract Binary Encodings for JavaScript Object Notation: JSON-B, JSON-C, JSON-D Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on September 9, 2016. Copyright Notice Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Hallam-Baker Expires September 9, 2016 [Page 1] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 1. Abstract Three binary encodings for JavaScript Object Notation (JSON) are presented. JSON-B (Binary) is a strict superset of the JSON encoding that permits efficient binary encoding of intrinsic JavaScript data types. JSON-C (Compact) is a strict superset of JSON-B that supports compact representation of repeated data strings with short numeric codes. JSON-D (Data) supports additional binary data types for integer and floating point representations for use in scientific applications where conversion between binary and decimal representations would cause a loss of precision. 2. Definitions 2.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Introduction JavaScript Object Notation (JSON) is a simple text encoding for the JavaScript Data model that has found wide application beyond its original field of use. In particular JSON has rapidly become a preferred encoding for Web Services. JSON encoding supports just four fundamental data types (integer, floating point, string and boolean), arrays and objects which consist of a list of tag-value pairs. Although the JSON encoding is sufficient for many purposes it is not always efficient. In particular there is no efficient representation for blocks of binary data. Use of base64 encoding increases data volume by 33%. This overhead increases exponentially in applications where nested binary encodings are required making use of JSON encoding unsatisfactory in cryptographic applications where nested binary structures are frequently required. Another source of inefficiency in JSON encoding is the repeated occurrence of object tags. A JSON encoding containing an array of a hundred objects such as {"first":1,"second":2} will contain a hundred occurrences of the string "first" (seven bytes) and a hundred occurrences of the string "second" (eight bytes). Using two byte code sequences in place of strings allows a saving of 11 bytes per object without loss of information, a saving of 50%. Hallam-Baker Expires September 9, 2016 [Page 2] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 A third objection to the use of JSON encoding is that floating point numbers can only be represented in decimal form and this necessarily involves a loss of precision when converting between binary and decimal representations. While such issues are rarely important in network applications they can be critical in scientific applications. It is not acceptable for saving and restoring a data set to change the result of a calculation. 3.1. Objectives The following were identified as core objectives for a binary JSON encoding: o * Low overhead encoding and decoding * Easy to convert existing encoders and decoders to add binary support * Efficient encoding of binary data * Ability to convert from JSON to binary encoding in a streaming mode (i.e. without reading the entire binary data block before beginning encoding. * Lossless encoding of JavaScript data types * The ability to support JSON tag compression and extended data types are considered desirable but not essential for typical network applications. Three binary encodings are defined: JSON-B (Binary) Simply encodes JSON data in binary. Only the JavaScript data model is supported (i.e. atomic types are integers, double or string). Integers may be 8, 16, 32 or 64 bits either signed or unsigned. Floating points are IEEE 754 binary64 format [IEEE-754]. Supports chunked encoding for binary and UTF-8 string types. JSON-C (Compact) As JSON-B but with support for representing JSON tags in numeric code form (16 bit code space). This is done for both compact encoding and to allow simplification of encoders/decoders in constrained Hallam-Baker Expires September 9, 2016 [Page 3] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 environments. Codes may be defined inline or by reference to a known dictionary of codes referenced via a digest value. JSON-D (Data) As JSON-C but with support for representing additional data types without loss of precision. In particular other IEEE 754 floating point formats, both binary and decimal and Intel's 80 bit floating point, plus 128 bit integers and bignum integers. 4. Extended JSON Grammar The JSON-B, JSON-C and JSON-D encodings are all based on the JSON grammar [RFC4627] using the same syntactic structure but different lexical encodings. JSON-B0 and JSON-C0 replace the JSON lexical encodings for strings and numbers with binary encodings. JSON-B1 and JSON-C1 allow either lexical encoding to be used. Thus any valid JSON encoding is a valid JSON-B1 or JSON-C1 encoding. The grammar of JSON-B, JSON-C and JSON-D is a superset of the JSON grammar. The following productions are added to the grammar: x-value Binary encodings for data values. As the binary value encodings are all self delimiting x-member An object member where the value is specified as an X-value and thus does not require a value-separator. b-value Binary data encodings defined in JSON-B. b-string Defined length string encoding defined in JSON-B. c-def Tag code definition defined in JSON-C. These may only appear before the beginning of an Object or Array and before any preceeding white space. Hallam-Baker Expires September 9, 2016 [Page 4] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 c-tag Tag code value defined in JSON-C. d-value Additional binary data encodings defined in JSON-D for use in scientific data applications. The JSON grammar is modified to permit the use of x-value productions in place of ( value value-separator ) : JSON-text = (object / array) object = *cdef begin-object [ *( member value-separator | x-member ) (member | x-member) ] end-object member = tag value x-member = tag x-value tag = string name-separator | b-string | c-tag array = *cdef begin-array [ *( value value-separator | x-value ) (value | x-value) ] end-array x-value = b-value / d-value value = false / null / true / object / array / number / string name-separator = ws %x3A ws ; : colon value-separator = ws %x2C ws ; , comma The following lexical values are unchanged: begin-array = ws %x5B ws ; [ left square bracket begin-object = ws %x7B ws ; { left curly bracket end-array = ws %x5D ws ; ] right square bracket end-object = ws %x7D ws ; } right curly bracket ws = *( %x20 %x09 %x0A %x0D ) false = %x66.61.6c.73.65 ; false null = %x6e.75.6c.6c ; null true = %x74.72.75.65 ; true The productions number and string are defined as before: Hallam-Baker Expires September 9, 2016 [Page 5] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 number = [ minus ] int [ frac ] [ exp ] decimal-point = %x2E ; . digit1-9 = %x31-39 ; 1-9 e = %x65 / %x45 ; e E exp = e [ minus / plus ] 1*DIGIT frac = decimal-point 1*DIGIT int = zero / ( digit1-9 *DIGIT ) minus = %x2D ; - plus = %x2B ; + zero = %x30 ; 0 string = quotation-mark *char quotation-mark char = unescaped / escape ( %x22 / %x5C / %x2F / %x62 / %x66 / %x6E / %x72 / %x74 / %x75 4HEXDIG ) escape = %x5C ; \ quotation-mark = %x22 ; " unescaped = %x20-21 / %x23-5B / %x5D-10FFFF 5. JSON-B The JSON-B encoding defines the b-value and b-string productions: b-value = b-atom | b-string | b-data | b-integer | b-float b-string = *( string-chunk ) string-term b-data = *( data-chunk ) data-last b-integer = p-int8 | p-int16 | p-int32 | p-int64 | p-bignum16 | n-int8 | n-int16 | n-int32 | n-int64 | n-bignum16 b-float = binary64 The lexical encodings of the productions are defined in the following table where the column 'tag' specifies the byte code that begins the production, 'Fixed' specifies the number of data bytes that follow and 'Length' specifies the number of bytes used to define the length of a variable length field following the data bytes: +--------------+-----+-------+--------+-----------------------------+ | Production | Tag | Fixed | Length | Data Description | +--------------+-----+-------+--------+-----------------------------+ | string-term | x80 | - | 1 | Terminal String 8 bit | | | | | | length | | | | | | | | string-term | x81 | - | 2 | Terminal String 16 bit | Hallam-Baker Expires September 9, 2016 [Page 6] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 | | | | | length | | | | | | | | string-term | x82 | - | 4 | Terminal String 32 bit | | | | | | length | | | | | | | | string-term | x83 | - | 8 | Terminal String 64 bit | | | | | | length | | | | | | | | string-chunk | x84 | - | 1 | Non-Terminal String 8 bit | | | | | | length | | | | | | | | string-chunk | x85 | - | 2 | Non-Terminal String 16 bit | | | | | | length | | | | | | | | string-chunk | x86 | - | 4 | Non-Terminal String 32 bit | | | | | | length | | | | | | | | string-chunk | x87 | - | 8 | Non-Terminal String 64 bit | | | | | | length | | | | | | | | data-term | x88 | - | 1 | Terminal Data 8 bit length | | | | | | | | data-term | x89 | - | 2 | Terminal Data 16 bit length | | | | | | | | data-term | x8A | - | 4 | Terminal Data 32 bit length | | | | | | | | data-term | x8B | - | 8 | Terminal Data 64 bit length | | | | | | | | data-chunk | x8C | - | 1 | Non-Terminal Data 8 bit | | | | | | length | | | | | | | | data-chunk | x8D | - | 2 | Non-Terminal Data 16 bit | | | | | | length | | | | | | | | data-chunk | x8E | - | 4 | Non-Terminal Data 32 bit | | | | | | length | | | | | | | | data-chunk | x8F | - | 8 | Non-Terminal String 64 bit | | | | | | length | | | | | | | | p-int8 | xA0 | 1 | - | Positive 8 bit Integer | | | | | | | | p-int16 | xA1 | 2 | - | Positive 16 bit Integer | | | | | | | | p-int32 | xA2 | 4 | - | Positive 32 bit Integer | | | | | | | | p-int64 | xA3 | 8 | - | Positive 64 bit Integer | | | | | | | Hallam-Baker Expires September 9, 2016 [Page 7] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 | p-bignum16 | xA5 | - | 2 | Positive Bignum 16 bit | | | | | | length | | | | | | | | n-int8 | xA8 | 1 | - | Negative 8 bit Integer | | | | | | | | n-int16 | xA9 | 2 | - | Negative 16 bit Integer | | | | | | | | n-int32 | xAA | 4 | - | Negative 32 bit Integer | | | | | | | | n-int64 | xAB | 8 | - | Negative 64 bit Integer | | | | | | | | n-bignum16 | xAD | - | 2 | Negative Bignum 16 bit | | | | | | length | | | | | | | | binary64 | x92 | 8 | - | IEEE 754 Floating Point | | | | | | binary64 | | | | | | | | b-value | xB0 | - | - | True | | | | | | | | b-value | xB1 | - | - | False | | | | | | | | b-value | xB2 | - | - | Null | +--------------+-----+-------+--------+-----------------------------+ A data type commonly used in networking that is not defined in this scheme is a datetime representation. To define such a data type, a string containing a date-time value in Internet type format is typically used. 5.1. JSON-B Examples The following examples show examples of using JSON-B encoding: Hallam-Baker Expires September 9, 2016 [Page 8] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 A0 2A 42 (as 8 bit integer) A1 00 2A 42 (as 16 bit integer) A2 00 00 00 2A 42 (as 32 bit integer) A3 00 00 00 00 00 00 00 2A 42 (as 64 bit integer) A5 00 01 42 42 (as Bignum) 80 05 48 65 6c 6c 6f "Hello" (single chunk) 81 00 05 48 65 6c 6c 6f "Hello" (single chunk) 84 05 48 65 6c 6c 6f 80 00 "Hello" (as two chunks) 92 3f f0 00 00 00 00 00 00 1.0 92 40 24 00 00 00 00 00 00 10.0 92 40 09 21 fb 54 44 2e ea 3.14159265359 92 bf f0 00 00 00 00 00 00 -1.0 B0 true B1 false B2 null 6. JSON-C JSON-C (Compressed) permits numeric code values to be substituted for strings and binary data. Tag codes MAY be 8, 16 or 32 bits long encoded in network byte order. Tag codes MUST be defined before they are referenced. A Tag code MAY be defined before the corresponding data or string value is used or at the same time that it is used. A dictionary is a list of tag code definitions. An encoding MAY incorporate definitions from a dictionary using the dict-hash production. The dict hash production specifies a (positive) offset value to be added to the entries in the dictionary followed by the UDF fingerprint [draft-hallambaker-udf] of the dictionary to be used. Hallam-Baker Expires September 9, 2016 [Page 9] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 +------------+-----+-------+--------+-------------------------------+ | Production | Tag | Fixed | Length | Data Description | +------------+-----+-------+--------+-------------------------------+ | c-tag | xC0 | 1 | - | 8 bit tag code | | | | | | | | c-tag | xC1 | 2 | - | 16 bit tag code | | | | | | | | c-tag | xC2 | 4 | - | 32 bit tag code | | | | | | | | c-def | xC4 | 1 | - | 8 bit tag definition | | | | | | | | c-def | xC5 | 2 | - | 16 bit tag definition | | | | | | | | c-def | xC6 | 4 | - | 32 bit tag definition | | | | | | | | c-tag | xC8 | 1 | - | 8 bit tag code & definition | | | | | | | | c-tag | xC9 | 2 | - | 16 bit tag code & definition | | | | | | | | c-tag | xCA | 4 | - | 32 bit tag code & definition | | | | | | | | c-def | xCC | 1 | - | 8 bit tag dictionary | | | | | | definition | | | | | | | | c-def | xCD | 2 | - | 16 bit tag dictionary | | | | | | definition | | | | | | | | c-def | xCE | 4 | - | 32 bit tag dictionary | | | | | | definition | | | | | | | | dict-hash | xD0 | 4 | 1 | UDF fingerprint of dictionary | +------------+-----+-------+--------+-------------------------------+ All integer values are encoded in Network Byte Order (most significant byte first). 6.1. JSON-C Examples The following examples show examples of using JSON-C encoding: Hallam-Baker Expires September 9, 2016 [Page 10] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 C8 20 80 05 48 65 6c 6c 6f "Hello" 20 = "Hello" C4 21 80 05 48 65 6c 6c 6f 21 = "Hello" C0 20 "Hello" C1 00 20 "Hello" D0 00 00 01 00 20 Insert dictionary at code 256 e3 b0 c4 42 98 fc 1c 14 9a fb f4 c8 99 6f b9 24 27 ae 41 e4 64 9b 93 4c a4 95 99 1b 78 52 b8 55 UDF (C4 21 80 05 48 65 6c 6c 6f) 7. JSON-D (Data) JSON-B and JSON-C only support the two numeric types defined in the JavaScript data model: Integers and 64 bit floating point values. JSON-D (Data) defines binary encodings for additional data types that are commonly used in scientific applications. These comprise positive and negative 128 bit integers, six additional floating point representations defined by IEEE 754 [RFC2119] and the Intel extended precision 80 bit floating point representation. Should the need arise, even bigger bignums could be defined with the length specified as a 32 bit value permitting bignums of up to 2^35 bits to be represented. d-value = d-integer | d-float d-float = binary16 | binary32 | binary128 | binary80 | decimal32 | decimal64 | decimal 128 8. Hallam-Baker Expires September 9, 2016 [Page 11] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 +------------+-----+-------+--------+-------------------------------+ | Production | Tag | Fixed | Length | Data Description | +------------+-----+-------+--------+-------------------------------+ | p-int128 | xA4 | 16 | - | Positive 128 bit Integer | | | | | | | | n-in7128 | xAC | 16 | - | Negative 128 bit Integer | | | | | | | | binary16 | x90 | 2 | - | IEEE 754 Floating Point | | | | | | binary16 | | | | | | | | binary32 | x91 | 4 | - | IEEE 754 Floating Point | | | | | | binary32 | | | | | | | | binary128 | x94 | 16 | - | IEEE 754 Floating Point | | | | | | binary128 | | | | | | | | intel80 | x95 | 10 | - | Intel 80 bit extended binary | | | | | | Floating Point | | | | | | | | decimal32 | x96 | 4 | - | IEEE 754 Floating Point | | | | | | decimal32 | | | | | | | | decimal64 | x97 | 8 | - | IEEE 754 Floating Point | | | | | | decimal64 | | | | | | | | decimal128 | x98 | 18 | - | IEEE 754 Floating Point | | | | | | decimal128 | +------------+-----+-------+--------+-------------------------------+ 9. 10. Acknowledgements This work was assisted by conversations with Nico Williams and other participants on the applications area mailing list. 11. Security Considerations A correctly implemented data encoding mechanism should not introduce new security vulnerabilities. However, experience demonstrates that some data encoding approaches are more prone to introduce vulnerabilities when incorrectly implemented than others. In particular, whenever variable length data formats are used, the possibility of a buffer overrun vulnerability is introduced. While best practice suggests that a coding language with native mechanisms for bounds checking is the best protection against such errors, such approaches are not always followed. While such vulnerabilities are Hallam-Baker Expires September 9, 2016 [Page 12] Internet-Draft JSON-B, JSON-C, JSON-D March 2016 most commonly seen in the design of decoders, it is possible for the same vulnerabilities to be exploited in encoders. A common source of such errors is the case where nested length encodings are used. For example, a decoder relies on an outermost length encoding that specifies a length on 50 bytes to allocate memory for the entire result and then attempts to copy a string with a declared length of 1000 bytes within the sequence. The extensions to the JSON encoding described in this document are designed to avoid such errors. Length encodings are only used to define the length of x-value constructions which are always terminal and cannot have nested data entries. 12. IANA Considerations [TBS list out all the code points that require an IANA registration] 13. Normative References [IEEE-754] "[Reference Not Found!]". [draft-hallambaker-udf] "[Reference Not Found!]". Author's Address Phillip Hallam-Baker Comodo Group Inc. Email: philliph@comodo.com Hallam-Baker Expires September 9, 2016 [Page 13]