INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NAME INSTALL - Installation procedure for NetBSD/vax DESCRIPTION About this Document This document describes the installation procedure for NetBSD 1.4.1 on the vax platform. It is available in four different formats titled INSTALL.ext, where ext is one of .ps, .html, .more, or .txt. .ps PostScript. .html Standard internet HTML. .more The enhanced text format used on Unix-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line man pages are generally pre- sented. .txt Plain old ASCII. You are reading the ASCII version. What is NetBSD? The NetBSD Operating System is a fully functional Open Source UN*X-like operating system derived from the Berkeley Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on twenty different system architectures featuring eight distinct families of CPUs, and is being ported to more. The NetBSD 1.4.1 release contains complete binary releases for fourteen different machine types. (The six remaining are not fully supported at this time and are thus not part of the binary distri- bution. For information on them, please see the NetBSD web site at http://www.netbsd.org/) NetBSD is a completely integrated system. In addition to its highly portable, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, The X Window System, and nu- merous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. Changes Since The Last Release The NetBSD 1.4.1 release is a substantial improvement over its predeces- sors. We have provided numerous significant functional enhancements, in- cluding support for many new devices, integration of hundreds of bug fix- es, new and updated kernel subsystems, and many userland enhancements. The results of these improvements is a stable operating system fit for production use that rivals most commercially available systems. It is impossible to completely summarize the nearly two years of develop- ment that went into the NetBSD 1.4.1 release. Some highlights include: o Substantial improvements in the TCP/IP implementation, including nu- merous performance enhancements and bug fixes by Jason Thorpe and others. o A new, high efficiency kernel memory pool allocator by Paul Kranen- burg. This has been integrated into most kernel subsystems. o A new, totally rewritten virtual memory subsystem, UVM, created by Chuck Cranor, which is substantially cleaner and better performing than the old Mach derived VM subsystem. o Improved POSIX and XPG standards compliance. o Completion of the integration of all remaining 4.4BSD Lite-2 kernel improvements and bug fixes that had not been previously integrated. (Integration of all userland components was completed before NetBSD 1.3) o Several new ports, including macppc, bebox, sparc64, next68k, and others, have been integrated into the source tree. o The system compilers have been upgraded to egcs 1.1.1, and the system compiler toolchain now (mostly) uses the latest versions of GNU binu- tils instead of the obsolete versions left over from 4.4BSD Lite. o Everyone's favorite ftp(1) client has been improved even further. See the man page for details. o A new architecture independent console driver, wscons(4), has been integrated into many ports. o Numerous improvements have been made to the audio subsystem support, including support for MIDI device drivers. o Linux compatibility support has been improved. o A number of scheduler enhancements have yielded dramatic improvements in interactive performance and better control of background tasks. o Several network tunneling protocols, including GRE and IP in IP, have been implemented. o Kernel support for the CODA distributed file system has been added. o Manuel Bouyer completed major changes to the IDE support. It is now architecture independent. Major changes have been made to the IDE code for better error handling, improved ATAPI support, 32 bit data I/O support and bus-master DMA support on PCI IDE controllers. o Lennart Augustsson has added full USB support, permitting the use of a wide variety of Universal Serial Bus peripherals. The drivers should easily port to any future platforms that support the PCI bus. See usb(4) for an overview. o RAIDframe, version 1.1, from the Parallel Data Laboratory at Carnegie Mellon University, has been integrated. Supports RAID levels 0, 1, 4, 5, and more. o Luke Mewburn added nsswitch.conf(5) functionality to the system to specify the search order for system databases. o syslogd(8) now supports listening on multiple sockets, to make the chrooting of servers easier. o Most third party packages have been updated to the latest stable re- lease. As has been noted, there have also been innumerable bug fixes. Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue. This is the third public release of NetBSD for the VAX. The Future of NetBSD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: o providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. o providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. o providing a better position from which to undertake promotional ac- tivities. o periodically organizing workshops for developers and other interested people to discuss ongoing work. We intend to begin narrowing the time delay between releases. Our ambi- tion is to provide a full release every six to eight months. We hope to support even more hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. In addition, we intend to provide Anonymous CVS access to the NetBSD source tree in the near fu- ture, so that anyone on the internet can examine the full NetBSD source code repository. We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the us- ability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. Sources of NetBSD NetBSD Mirror Site List The following sites mirror NetBSD as of April 03, 1999. If you wish to become a distribution site for NetBSD, contact mirrors@netbsd.org. FTP mirrors Australia ftp.au.netbsd.org RMIT University, Melbourne ftp://ftp.au.netbsd.org/pub/NetBSD/ ftp2.au.netbsd.org University of Queensland, Brisbane ftp://ftp2.au.netbsd.org/pub/NetBSD/ Austria ftp.at.netbsd.org University of Technology, Vienna ftp://ftp.at.netbsd.org/pub/NetBSD/ Brazil ftp.ravel.ufrj.br Cidade Universitaria ftp://ftp.ravel.ufrj.br/pub/NetBSD/ Denmark ftp.dk.netbsd.org Aalborg University ftp://ftp.dk.netbsd.org/pub/NetBSD/ Finland ftp.fi.netbsd.org The Finnish University and Research Network, Espoo ftp://ftp.fi.netbsd.org/pub/NetBSD/ France ftp.fr.netbsd.org Paris University ftp://ftp.fr.netbsd.org/pub/NetBSD/ Germany ftp.de.netbsd.org University of Trier ftp://ftp.de.netbsd.org/pub/NetBSD/ ftp2.de.netbsd.org University of Erlangen-Nuremberg ftp://ftp2.de.netbsd.org/pub/NetBSD/ ftp.uni-regensburg.de University of Regensburg ftp://ftp.uni-regensburg.de/pub/comp/os/NetBSD/ Japan ftp.jp.netbsd.org Internet Research Institute Inc., Tokyo ftp://ftp.jp.netbsd.org/pub/NetBSD/ core.ring.gr.jp Electrotechnical Laboratory ftp://core.ring.gr.jp/pub/NetBSD/ ftp.dti.ad.jp Dream Train Internet Inc., Tokyo ftp://ftp.dti.ad.jp/pub/NetBSD/ mirror.nucba.ac.jp Nagoya University of Commerce and Business ftp://mirror.nucba.ac.jp/mirror/NetBSD/ netbsd.tohoku.ac.jp Tohoku University, Sendai ftp://netbsd.tohoku.ac.jp/NetBSD/ ring.asahi-net.or.jp ASAHI Net ftp://ring.asahi-net.or.jp/pub/NetBSD/ Netherlands ftp.nl.netbsd.org University of Amsterdam ftp://ftp.nl.netbsd.org/pub/NetBSD/ Norway ftp.no.netbsd.org Bergen IT Consult AS ftp://ftp.no.netbsd.org/pub/NetBSD/ ftp.ntnu.no Norwegian University of Science and Technology ftp://ftp.ntnu.no/pub/NetBSD/ Russia ftp.ru.netbsd.org Landau Institute for Theoretical Physics, Chernogolovka ftp://ftp.ru.netbsd.org/pub/NetBSD/ Sweden ftp.stacken.kth.se Royal Institute of Technology, Stockholm ftp://ftp.stacken.kth.se/pub/OS/NetBSD/ ftp.sunet.se Swedish University NETwork, Uppsala ftp://ftp.sunet.se/pub/os/NetBSD/ UK ftp.uk.netbsd.org Domino, London ftp://ftp.uk.netbsd.org/pub/NetBSD/ sunsite.org.uk ftp://sunsite.org.uk/packages/netbsd/ USA ftp.netbsd.org Silicon Valley, California ftp://ftp.netbsd.org/pub/NetBSD/ ftp.cs.umn.edu University of Minnesota ftp://ftp.cs.umn.edu/pub/NetBSD ftp.eecs.umich.edu University of Michigan, Ann Arbor ftp://ftp.eecs.umich.edu/pub/NetBSD/ ftp.iastate.edu Iowa State University ftp://ftp.iastate.edu/pub/netbsd/ ftp.op.net ftp://ftp.op.net/pub/NetBSD/ AFS mirrors Sweden ftp.stacken.kth.se Royal Institute of Technology, Stockholm AFS path: /afs/stacken.kth.se/ftp/pub/OS/NetBSD USA ftp.iastate.edu Iowa State University AFS path: /afs/iastate.edu/public/ftp/pub/netbsd NFS mirrors UK sunsite.org.uk Instructions: mount -o ro sunsite.org.uk:/public/packages/netb- sd /mnt SUP mirrors Australia sup.au.netbsd.org RMIT University, Melbourne Instructions: ftp://sup.au.netbsd.org/pub/NetBSD/sup/README.sup France sup.fr.netbsd.org Paris University Instructions: Similar to sup.netbsd.org Germany sup.de.netbsd.org University of Trier Instructions: ftp://sup.de.netbsd.org/pub/NetBSD/sup/sup- file.example Japan sup.jp.netbsd.org Internet Research Institute Inc., Tokyo Instructions: ftp://sup.jp.netbsd.org/pub/NetBSD/sup/README.sup Norway sup.no.netbsd.org Norwegian University of Science and Technology Instructions: See /usr/src/share/examples/supfiles/sup.no.netb- sd.org UK sup.uk.netbsd.org Domino, London Instructions: See ftp://ftp.netbsd.org/pub/NetB- SD/sup/README.sup USA sup.netbsd.org Silicon Valley, California Instructions: See ftp://ftp.netbsd.org/pub/NetB- SD/sup/README.sup ftp.cs.umn.edu University of Minnesota Instructions: hostbase=/ftp/ftp/packages/NetBSD, collections are the same as on sup.NetBSD.ORG WWW mirrors Australia www.au.netbsd.org RMIT University, Melbourne http://www.au.netbsd.org/ Austria www.at.netbsd.org University of Technology, Vienna http://www.at.netbsd.org/ Finland www.fi.netbsd.org Global Wire Oy, Lappeenranta http://www.fi.netbsd.org/ France www.fr.netbsd.org Paris University http://www.fr.netbsd.org/ Germany www.de.netbsd.org http://www.de.netbsd.org/ Japan www.jp.netbsd.org Internet Research Institute Inc., Tokyo http://www.jp.netbsd.org/ Norway www.no.netbsd.org Bergen IT Consult AS http://www.no.netbsd.org/ USA www.netbsd.org Western Washington State University http://www.netbsd.org/ www2.us.netbsd.org New York http://www.us.netbsd.org/ NetBSD 1.4.1 Release Contents The root directory of the NetBSD 1.4.1 release is organized as follows: .../NetBSD-1.4.1/ BUGS Known bugs list (somewhat incomplete and out of date). CHANGES Changes since earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 1.4.1 distribution. README.files README describing the distribution's contents. TODO NetBSD's todo list (also somewhat incomplete and out of date). patches/ Post-release source code patches. source/ Source distribution sets; see below. In addition to the files and directories listed above, there is one di- rectory per architecture, for each of the architectures for which NetBSD 1.4.1 has a binary distribution. There are also 'README.export- control' files sprinkled liberally throughout the distribution tree, which point out that there are some portions of the distribution (i.e. the `domestic' portion) that may be subject to export regulations of the United States. It is your responsibility to determine whether or not it is legal for you to export these portions and to act accordingly. The source distribution sets can be found in subdirectories of the "source" subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: secrsrc.tgz: This set contains the "domestic" sources. These sources may be subject to United States export regulations. 421K gzipped, 2M uncompressed gnusrc.tgz: This set contains the "gnu" sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. 19M gzipped, 84.2M uncompressed syssrc.tgz: This set contains the sources to the NetBSD 1.4.1 ker- nel, config(8), and dbsym(8). 13.5M gzipped, 66.7M uncompressed sharesrc.tgz: This set contains the "share" sources, which include the sources for the man pages not associated with any par- ticular program, the sources for the typesettable docu- ment set, the dictionaries, and more. 3M gzipped, 11.9M uncompressed src.tgz: This set contains all of the NetBSD 1.4.1 sources which are not mentioned above. 16.1M gzipped, 73.6M uncompressed Most of the above source sets are located in the source/sets subdirectory of the distribution tree. The secrsrc.tgz set is contained in the source/security subdirectory. This set, which is available only to users in the United States and Canada, contains the sources normally found in /usr/src/domestic - primarily kerberos and other cryptographic security related software. (Remember, because of United States law, it may not be legal to distribute this set to locations outside of the United States and Canada.) The source sets are distributed as compressed tar files. They may be un- packed into /usr/src with the command: cat set_name.tgz | gunzip | (cd /; tar xpf - ) The sets/Split/ and security/Split/ subdirectories contain split versions of the source sets for those users who need to load the source sets from floppy or otherwise need a split distribution. The split sets are are named "set_name.xx" where "set_name" is the distribution set name, and "xx" is the sequence number of the file, starting with "aa" for the first file in the distribution set, then "ab" for the next, and so on. All of these files except the last one of each set should be exactly 240,640 bytes long. (The last file is just long enough to contain the remainder of the data for that distribution set.) The split distributions may be reassembled and extracted with cat as follows: cat set_name.?? | gunzip | (cd /; tar xpf - ) In each of the source distribution set directories, there is a file named CKSUMS which contains the checksums of the files in that directory, as generated by the cksum(1) utility. You can use cksum to check the in- tegrity of the archives, if you suspect that one of the files is corrupt and have access to a cksum binary. Checksums based on other algorithms may also be present - see the release(7) man page for details. NetBSD/vax Subdirectory Structure The vax-specific portion of the NetBSD 1.4.1 release is found in the vax subdirectory of the distribution: .../NetBSD-1.4.1/vax/ INSTALL.html INSTALL.ps INSTALL.txt INSTALL.more Installation notes; this file. The .more file contains underlined text using the more(1) conventions for indicat- ing italic and bold display. binary/ sets/ vax binary distribution sets; see below. security/ vax security distribution; see below. installation/ Binary Distribution Sets The NetBSD vax binary distribution sets contain the binaries which com- prise the NetBSD 1.4.1 release for the vax. There are eight binary dis- tribution sets and the security distribution set. The binary distribu- tion sets can be found in the vax/binary/sets subdirectory of the NetBSD 1.4.1 distribution tree, and are as follows: base The NetBSD 1.4.1 vax base binary distribution. You must in- stall this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. 10.1M gzipped, 24.9M uncompressed comp Things needed for compiling programs. This set includes the system include files (/usr/include) and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. 7.8M gzipped, 25.2M uncompressed etc This distribution set contains the system configuration files that reside in /etc and in several other places. This set must be installed if you are installing the system from scratch, but should not be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and carefully upgrade your configuration files by hand.) 60K gzipped, 350K uncompressed games This set includes the games and their manual pages. 2.8M gzipped, 6.8M uncompressed kern This set contains a NetBSD/vax 1.4.1 GENERIC kernel, named /netbsd. You must install this distribution set. 518k gzipped, 1M uncompressed man This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. 4.1M gzipped, 16.4M uncompressed misc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from /usr/share. 2.1M gzipped, 8.1M uncompressed text This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. 1.2M gzipped, 4.3M uncompressed The vax security distribution set is named secr and can be found in the vax/binary/security subdirectory of the NetBSD 1.4.1 distribution tree. It contains security- related binaries which depend on cryptographic source code. You do not need this distribution set to use encrypted passwords in your password file; the base distribution includes a crypt library which can perform only the one-way encryption function. The security distribution includes a version of the Kerberos IV network security system, and a Kerberized version of telnet(1) program. The secr distribution set can be found only on those sites which carry the complete NetBSD distribution and which can legally obtain it. Because of United States law, it may not be legal to distribute this set to locations outside of the United States and Canada. NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 3.3.3.1. Binary sets for the X Window system are distributed with NetBSD. The sets are: xbase The basic files needed for a complete X client environment. This does not include the X servers. xcomp The extra libraries and include files needed to compile X source code. xcontrib Programs that were contributed to X. xfont Fonts needed by X. The vax binary distribution sets are distributed as gzipped tar files named with the extension .tgz, e.g. base.tgz. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the files are /-relative and therefore are extracted below the current directory. That is, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the tar xfp command from /. Note Each directory in the vax binary distribution also has its own checksum files, just as the source distribution does: All BSDSUM files are historic BSD checksums for the various files in that directory, in the format produced by the command: cksum -o 1 file All CKSUM files are POSIX checksums for the various files in that directory, in the format produced by the command: cksum file. All MD5 files are MD5 digests for the various files in that direc- tory, in the format produced by the command: cksum -m file. All SYSVSUM files are historic AT&T System V UNIX checksums for the various files in that directory, in the format produced by the command: cksum -o -2 file. The MD5 digest is the safest checksum, followed by the POSIX checksum. The other two checksums are provided only to ensure that the widest possible range of system can check the integrity of the release files. NetBSD/vax System Requirements and Supported Devices Hardware supported by NetBSD/vax 1.4.1 includes (but may not be limited to): CPU types: VAX 11/750, VAX 11/78{0,5}, VAX 8200/8250/8300/8350, VAX 8600/8650, MicroVAX II/VAXstation II, MicroVAX III, Mi- croVAX 3300/3400, MicroVAX 3500/3600, MicroVAX 3800/3900, MicroVAX 2000/VAXstation 2000, VAXstation 3100 model 30,38,40,48,76, VAXserver 3100, VAXstation 3200/3500, and VAXstation 4000/60. Networking: DEUNA/DELUA Unibus ethernet, DEQNA/DELQA Q22 bus ethernet, and LANCE chip where available. Serial lines: DHU11/DHV11/DL11/DLV11/DZ11/DZQ11/DZV11 Unibus/Q22 bus asynchronous lines and DZ11-compatible lines on VAXsta- tions. Disks: UDA50 Unibus MSCP controller, KDA50/RQDX1/2/3 Q22 bus MSCP controller, KDB50 BI-bus MSCP controller, MFM and SCSI con- trollers on VAXstations (Note: currently no DMA, so very slow), RP04/05/06/07 and RM02/03/05/80 Massbus disks, and Console RL02 on VAX 8600. Some third-party controllers are also known to work, other do not. Tapes: TMSCP on Q22 bus (TK50/70, TU81), TMSCP on BI bus and SCSI tapes on VAXstations. Floppy: RX33/RX50 on RQDX controllers. RX50 on VAX 8200. Note: While NetBSD/vax ships with complete X sets, the X xserver does not currently support any keyboards or mice. The X clients will work fine when set to a remote display. The minimal configuration requires 2M of RAM and ~40MB of disk space, but the installation really requires 6MB RAM unless you plan on using Jedi powers. Here is a table of recommended HD partition sizes for a full install: Partition Advised Needed root (/) 32M 16M user (/usr) 110M 45M swap 2 or 3 * RAM Anything else is up to you! Getting the NetBSD System on to Useful Media Installation is supported from several media types, including: o Floppy o FTP o Tape o NFS Note Installing on a "bare" machine requires some bootable device; ei- ther a tape or floppy drive or a NFS server together with a ma- chine that can act as a MOP loader, such as another machine run- ning NetBSD. NetBSD/vax can use both BOOTP/DHCP and BOOTPARAMS for netboot installations. The procedure for transferring the distribution sets onto installation media depends on the type of media. most of it is up to you, depending what you want to install, but preferred are to do the installation over network as soon as the install kernel is booted. Creating boot tapes Fetch the bootable bootfs image from .../NetBSD-1.4.1/vax/installation/bootfs/boot.fs.gz Gunzip boot.fs.gz and write it on the beginning of the tape. Under NetB- SD this is done via: gunzip boot.fs.gz mt -f /dev/nrmt0 rewind dd if=boot.fs of=/dev/nrmt0 mt -f /dev/nrmt0 rewoffl Under Ultrix the tape name is different: gunzip boot.fs.gz mt -f /dev/rmt0h rewind dd if=boot.fs of=/dev/rmt0h mt -f /dev/rmt0h rewoffl Of course, if you have a tape unit other than unit 0 you have to use the corresponding unit number. If you wish to install the sets from tape then stage you will need to download the *.tgz files from .../NetBSD-1.4.1/vax/binary/sets (if your disk is less than 200MB you will probably want to exclude the X sets) and then before the 'mt ... rewoffl' run tar cvf /dev/nrmt0 *.tgz When you have booted the bootfs and completed the disk partitioning you will be prompted to 'select medium' for install. At this point you will need to press ^Z (Ctrl+Z) to suspend the install tool, then cd /mnt mt -f /dev/nrmt0 rewind mt -f /dev/nrmt0 fsf tar xvf /dev/nrmt0 fg then select "install from local dir" and give "/mnt". Note: If your disk is small you will need to be careful about filling it up. If you are using any other OS to create bootable tapes, remember that the blocksize must be 512 for the file to be bootable! Otherwise it just won't work. Creating boot floppies Fetch the bootable bootfs image from .../NetBSD-1.4.1/vax/installation/bootfs/boot.fs.gz and gunzip it. It is a 1MB bootable image that will boot from any floppy of size 1MB and bigger. Note that you cannot install from RX50 floppies due to the small size. This may change in the future. All floppies except RX50 use a standardized format for storing data so writing the bootfs to the floppy should be feasible from any PC. From DOS the preferred way to do this would be via RAWRITE.EXE for RX23 and PUTR for RX33. Booting from NFS server All VAXen that can boot over network uses MOP, a DEC protocol. To be able to use MOP, a MOP daemon must be present on one of the machines on the local network. The boot principle is: o The VAX broadcast a wish to load an image. o A mopd answers and send the boot program to the VAX. o The boot program does rarp/bootp requests, mounts the root filesystem and loads the kernel. o The kernel is loaded and starts executing. If your machine has a disk and network connection, it may be convenient for you to install NetBSD over the network. This involves temporarily booting your machine over NFS, just long enough so you can initialize its disk. This method requires that you have access to an NFS server on your network so you can configure it to support diskless boot for your ma- chine. Configuring the NFS server is normally a task for a system admin- istrator, and is not trivial. If you are using a NetBSD system as the boot-server, have a look at the diskless(8) manual page for guidelines on how to proceed with this. If the server runs another operating system, consult the documentation that came with it. (I.e. add_client(8) on SunOS.) There is also very useful documentation at http://www.netbsd.org/Documentation/network/netboot/ You also must install a MOP loader. If you are booting from another NetB- SD machine, the MOP daemons are included in the distribution, otherwise you may have to install a MOP loader. A loader can be found at ftp.stacken.kth.se:/pub/OS/NetBSD/mopd Fetch the latest and read the installation instructions. The file that should be loaded is called boot.mop and is located in .../NetBSD-1.4.1/vax/installation/netboot/boot.mop The kernel to load is the same kernel as the bootfs uses and can be found in .../NetBSD-1.4.1/vax/installation/netboot/netbsd.ram.gz From the install program started in the kernel the rest of the system can be installed. There is also a very good (if somewhat out of date) FAQ for netbooting VAXen at http://world.std.com/~bdc/projects/vaxen/VAX-netboot-HOWTO.html that describes netbooting of VAXen from many different OS'es. Linux Note: On certain versions of linux (notably RedHat 6.0) the NFS server is broken in such a fashion that it will accept NFS3 mount re- quests but refuse to serve data via NFS3. The best option is probably to install NetBSD on the server, or find a non broken linux distribution (other versions of RedHat should be fine). Preparing your System for NetBSD Installation VAX machines usually need little or no preparation before installing NetBSD, other than the usual, well advised precaution of BACKING UP ALL DATA on any attached storage devices. If you are on a Qbus or Unibus system the disk controller(s) need be at the standard CSR addresses for DUA (772150) or DUB (760334) to be recog- nized by the kernel and boot programs. If you are installing on a VAXstation you may require a serial console. Installing the NetBSD System Installation of NetBSD/vax is now easier than ever! For the latest news, problem reports, and discussion, join the port-vax mainlist by mailing a line saying subscribe port-vax to majordomo@netsbd.org. Also, see http://www.netbsd.org for more infor- mation. If you encounter any problems, please report them via the mailing list or the send-pr(1) program so that they can be fixed for the next release. To install or upgrade NetBSD, you need to first boot the installation program and then interact with the screen-menu program sysinst. The in- stallation program actually consists of the NetBSD kernel plus an in-mem- ory file system of utility programs. The usual procedure is to write the installation system to the install media, as described earlier. Booting from install media The built-in console monitor understands a bunch of commands, dependent of which VAX you have. To just boot from a device, type 'B' at the '>>>' prompt. Device naming in the console monitor differs a lot from the Unix counterparts. A device looks like "ddcu", where dd is the device type, c is the controller number and u is the device unit. Many console monitors also support the 'SHOW DEV' command, which shows available units to boot from. A summary of the most common boot devices and their name: B DUA0 - first MSCP controller, unit 0. B MUA0 - first TMSCP tape controller, unit 0. B DKB0 - second SCSI bus, unit 0. B XQA0 - first Q22 bus Ethernet controller. B ESA0 - first LANCE Ethernet controller on VAXstations. Other devices may be appropriate for your configuration. Then just proceed with the program sysinst. The install descriptions for sysinst that follows can be easily adopted to vax. Running the Sysinst Installation Program 1. Introduction Using sysinst, installing NetBSD is a relatively easy process. You still should read this document and have it in hand when doing the installation process. This document tries to be a good guideline for the installation and as such covers many details to be completed. Do not let this discourage you, the install program is not hard to use. 2. Possible PCMCIA issues There is a serious bug that may make installation of NetBSD on PCMCIA machines difficult. This bug does not make use of PCMCIA dif- ficult once a machine is installed. If you do not have PCMCIA on your machine [PCMCIA] is only really used on laptop machines), you can skip this section, and ignore the ``[PCMCIA]'' notes. This will explains how to work around the installation problem. What is the bug: The kernel keeps careful track of what interrupts and i/o ports are in use during autoconfiguration. It then allows the PCMCIA devices to pick unused interrupts and ports. Unfortu- nately, not all devices are included in the INSTALL kernels in order to save space. Let's say your laptop has a soundblaster device built in. The INSTALL kernel has no sound support. The PCMCIA code might allocate your soundblaster's IRQ and I/O ports to PCMCIA devices, causing them not to work. This is especially bad if one of the de- vices in question is your ethernet card. This problem will impact some, but not all, users of PCMCIA. If this bug is affecting you, watch the [PCMCIA] notes that will appear in this document. 3. General The following is a walk-through of the steps you will take while getting NetBSD installed on your hard disk. sysinst is a menu driv- en installation system that allows for some freedom in doing the in- stallation. Sometimes, questions will be asked and in many cases the default answer will be displayed in brackets (``[ ]'') after the question. If you wish to stop the installation, you may hit Control- C at any time, but if you do, you'll have to begin the installation process again from scratch. 4. Quick install First, let's describe a quick install. The other sections of this document go into the installation procedure in more detail, but you may find that you do not need this. If you want detailed instruc- tions, skip to section 3. This section describes a basic installa- tion, using a CD-ROM install as an example. o What you need. - The distribution sets (in this example, they are on CD). - One 1.44M 3.5" floppy. - A CD-ROM drive (SCSI or ATAPI), a harddisk and a minimum of of memory installed. - The harddisk should have at least + n megabytes of space free, where n is the number of megabytes of main memory in your system. If you wish to install the X window system as well, you will need at least 60Mb more. o The Quick Installation - Insert the boot floppy you just created. Boot the computer. The main menu will be displayed. - If you wish, you can configure some network settings immedi- ately by choosing the utilities menu and then configure network. It isn't actually required at this point, but it may be more convenient. Go back to the main menu. - Choose install - You will be guided through some steps regarding the setup of your disk, and the selection of distributed components to install. When in doubt, refer to the rest of this document for details. - After your disk has been prepared, choose CD-ROM as the medium. The default values for the path and device should be ok. - After all the files have been unpacked, go back to the main menu and select reboot, after you have removed the bootflop- py from the drive. - NetBSD will now boot. You should log in as root, and set a password for that account. You are also advised to edit the file /etc/rc.conf to match your system needs. - Your installation is now complete. - For configuring the X window system, if installed, see the files in /usr/X11R6/lib/X11/doc. Further information can be found on http://www.xfree86.org/ 5. Booting NetBSD [PCMCIA] Unplug your PCMCIA devices, so that they won't be found by NetBSD. Boot your machine using the boot floppy. The boot loader will start, and will print a countdown and begin booting. If the boot loader messages do not appear in a reasonable amount of time, you either have a bad boot floppy or a hardware problem. Try writing the install floppy image to a different disk, and using that. It will take a while to load the kernel from the floppy, probably around a minute or so, then, the kernel boot messages will be dis- played. This may take a little while also, as NetBSD will be probing your system to discover which hardware devices are installed. The most important thing to know is that wd0 is NetBSD's name for your first IDE disk, wd1 the second, etc. sd0 is your first SCSI disk, sd1 the second, etc. Note that, once the system has finished booting, you need not leave the floppy in the disk drive. Once NetBSD has booted and printed all the boot messages, you will be presented with a welcome message and a main menu. It will also include instructions for using the menus. 6. Network configuration [PCMCIA] You can skip this section, as you will only get data from floppy in the first part of the install. If you will not use network operation during the installation, but you do want your machine to be configured for networking once it is installed, you should first go to the utilities menu, and select Configure network option. If you only want to temporarily use net- working during the installation, you can specify these parameters later. If you are not using Domain Name Service (DNS), you can give an empty response in reply to answers relating to this. 7. Installation drive selection and parameters To start the installation, select the menu option to install NetBSD from the main menu. The first thing is to identify the disk on which you want to install NetBSD. sysinst will report a list of disks it finds and ask you for your selection. Depending on how many disks are found, you may get a different message. You should see disk names like wd0, wd1, sd0, or sd1. Next, depending on whether you are using a wdx or wdx disk, you will either be asked for the type of disk (wdx) you are using or you will be asked if you want to specify a fake geometry for your SCSI disk (sdx). The types of disk are be IDE, ST-506 or ESDI. If you're in- stalling on an ST-506 or ESDI drive, you'll be asked if your disk supports automatic sector forwarding. If you are sure that it does, reply affirmatively. Otherwise, the install program will automati- cally reserve space for bad144 tables. 8. Partitioning the disk. o Which portion of the disk to use. You will be asked if you want to use the entire disk or only part of the disk. If you decide to use the entire disk for NetBSD, it will be checked if there are already other systems present on the disk, and you will be asked to confirm whether you want to overwrite these. If you want to use the entire disk for NetBSD, you can skip the following section and go to Editing the NetBSD disklabel. o Editing the NetBSD disklabel. The partition table of the NetBSD part of a disk is called a disklabel. There are 3 layouts for the NetBSD part of the disk that you can pick from: Standard, Standard with X and Custom. The first two use a set of default values (that you can change) suitable for a normal installation, possibly including X. The last option lets you specify everything yourself. You will be presented with the current layout of the NetBSD disklabel, and given a chance to change it. For each partition, you can set the type, offset and size, block and fragment size, and the mount point. The type that NetBSD uses for normal file storage is called 4.2BSD. A swap partition has a special type called swap. Some partitions in the disklabel have a fixed purpose. Partition a is always the root partition, b is the swap partition, and c is the whole disk. Partitions e-h are available for other use. Traditionally, d is the partition mounted on the /usr directory, but this is historical practice, not a fixed value. You will then be asked to name your disk's disklabel. The de- fault response is mydisk. For most purposes this will be OK. If you choose to name it something different, make sure the name is a single word and contains no special characters. You don't need to remember this name. 9. Preparing your hard disk You are now at the point of no return. Nothing has been written to your disk yet, but if you confirm that you want to install NetBSD, your hard drive will be modified. If you are sure you want to pro- ceed, enter yes at the prompt. The install program will now label your disk and make the file sys- tems you specified. The filesystems will be initialized to contain NetBSD bootstrapping binaries and configuration files. You will see messages on your screen from the various NetBSD disk preparation tools that are running. There should be no errors in this section of the installation. If there are, restart from the beginning of the installation process. Otherwise, you can continue the installation program after pressing the return key. 10. Getting the distribution sets. The NetBSD distribution consists of a number of sets, that come in the form of gzipped tarfiles. A few sets must be installed for a working system, others are optional. At this point of the installa- tion, you will be presented with a menu which enables you to choose from one of the following methods of installing the sets. Some of these methods will first load the sets on your hard disk, others will extract the sets directly. For all these methods, the first step is making the sets available for extraction, and then do the actual installation. The sets can be made available in a few different ways. The following sections describe each of those methods. After reading the one about the method you will be using, you can continue to section 9 11. Installation using ftp To be able to install using ftp, you first need to configure your network setup, if you haven't already at the start of the install procedure. sysinst will do this for you, asking you to provide some data, like IP number, hostname, etc. If you do not have name service set up for the machine that you are installing on, you can just press return in answer to these questions, and DNS will not be used. You will also be asked to specify the host that you want to transfer the sets from, the directory on that host, and the account name and password used to log into that host using ftp. If you did not set up DNS when answering the questions to configure networking, you will need to specify an IP number instead of a hostname for the ftp serv- er. sysinst will proceed to transfer all the default set files from the remote site to your hard disk. 12. Installation using NFS To be able to install using NFS, you first need to configure your network setup, if you haven't already at the start of the install procedure. sysinst will do this for you, asking you to provide some data, like IP number, hostname, etc. If you do not have name service set up for the machine that you are installing on, you can just press return in answer to these questions, and DNS will not be used. You will also be asked to specify the host that you want to transfer the sets from, and the directory on that host that the files are in. This directory should be mountable by the machine you are installing on, i.e. correctly exported to your machine. If you did not set up DNS when answering the questions to configure networking, you will need to specify an IP number instead of a host- name for the NFS server. 13. Installation from CD-ROM When installing from a CD-ROM, you will be asked to specify the de- vice name for your CD-ROM player (usually cd0), and the directory name on the CD-ROM where the distribution files are. sysinst will then check if the files are indeed available in the specified location, and proceed to the actual extraction of the sets. 14. Installation from an unmounted filesystem In order to install from a local filesystem, you will need to speci- fy the device that the filesystem resides on (for example wd1e) the type of the filesystem, and the directory on the specified filesys- tem where the sets are located. sysinst will then check if it can indeed access the sets at that location. 15. Installation from a local directory This option assumes that you have already done some preparation yourself. The sets should be located in a directory on a filesystem that is already accessible. sysinst will ask you for the name of this directory. 16. Extracting the distribution sets After the install sets containing the NetBSD distribution have been made available, you can either extract all the sets (a full instal- lation), or only extract sets that you have selected. In the latter case you will be shown the currently selected sets, and given the opportunity to select the sets you want. Some sets always need to be installed (kern, base and etc) they will not be shown in this selec- tion menu. Before extraction begins, you can elect to watch the files being ex- tracted; the name of each file that is extracted will be shown. This can slow down the installation process considerably, especially on machines with slow graphics consoles or serial consoles. After all the files have been extracted, all the necessary device node files will be created. If you have already configured network- ing, you will be asked if you want to use this configuration for normal operation. If so, these values will be installed in the net- work configuration files. 17. Finalizing your installation. Congratulations, you have successfully installed NetBSD 1.4.1. You can now reboot the machine, and boot from harddisk. Post installation steps Once you've got the operating system running, there are a few things you need to do in order to bring the system into a propperly configured state, with the most important ones described below. 1. Configuring /etc/rc.conf If you haven't done any configuration of /etc/rc.conf, the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root filesystem mounted read-write. When the system asks you to choose a shell, simply hit return to get to a prompt. If you are asked for a terminal type, respond with vt220 (or whatever is appropriate for your terminal type) and hit return. At this point, you need to configure at least one file in the /etc directory. Change to the /etc directory and take a look at the /etc/rc.conf file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi-user boot can proceed. If your /usr directory is on a separate partition and you do not know how to use 'ed' or 'ex', you will have to mount your /usr partition to gain access to 'vi'. Do the follow- ing: mount /usr export TERM=vt220 If you have /var on a seperate partition, you need to repeat that step for it. After that, you can edit /etc/rc.conf with vi(1). When you have finished, type exit at the prompt to leave the single-user shell and continue with the multi-user boot. Other values that need to be set in /etc/rc.conf for a networked en- vironment are hostname and possibly defaultroute, furthermore add an ifconfig_int for your interface , along the lines of ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have myname.my.dom in /etc/hosts: ifconfig_de0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an /etc/resolv.conf file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Other files in /etc that are new to NetBSD 1.4 and may require modi- fication or setting up include /etc/mailer.conf, /etc/nsswitch.conf and /etc/wscons.conf. 2. Logging in After reboot, you can log in as root at the login prompt. There is no initial password, but if you're using the machine in a networked environment, you should create an account for yourself (see below) and protect it and the "root" account with good passwords. 3. Adding accounts Use the vipw(8) command to add accounts to your system, do not edit /etc/passwd directly. See adduser(8) for more information on the process of how to add a new user to the system. 4. The X Window System If you have installed the X window system, look at the files in /usr/X11R6/lib/X11/doc for information. Don't forget to add /usr/X11R6/bin to your path in your shell's dot file so that you have access to the X binaries. 5. Installing 3rd party packages There is a lot of software freely available for Unix-based systems, almost all of which can run on NetBSD. Modifications are usually needed to when transferring programs between different Unix-like systems, so the NetBSD packages collection incorporates any such changes necessary to make that software run on NetBSD, and makes the installation (and deinstallation) of the software packages easy. There's also the option of building a package from source, in case there's no precompiled binary available. Precompiled binaries can be found at ftp://ftp.netbsd.org/pub/NetBSD/packages/ Package sources for compiling packages can be obtained by retrieving the file ftp://ftp.netbsd.org/pub/NetBSD/NetBSD- current/tar_files/pkgsrc.tar.gz and extracting it into /usr/pkgsrc. See /usr/pkgsrc/README then for more information. 6. Misc o To adjust the system to your local timezone, point the /etc/localtime symlink to the appropriate file under /usr/share/zoneinfo. o Edit /etc/aliases to forward root mail to the right place (run newaliases(1) afterwards.) o The /etc/sendmail.cf file will almost definitely need to be ad- justed; files aiding in this can be found in /usr/share/sendmail. See the README file there for more infor- mation. o Edit /etc/rc.local to run any local daemons you use. o Many of the /etc files are documented in section 5 of the manu- al; so just invoking man filename is likely to give you more information on these files. Upgrading a previously-installed NetBSD System There is no upgrade program for NetBSD/vax; you will have to upgrade your system by hand. Here are some hints about how to do it: o First replace the kernel, /boot and the boot blocks with new ones. The boot system has changed since 1.3. o Reboot the system so you are running with the new kernel. o Untar the wanted distributions. Remember to use the --unlink flag to tar(1), otherwise you will run into trouble. o Reboot the system once again. o Now you will (hopefully) be up and running in the new world. Note You should not extract the etc set if upgrading. Instead, you should extract that set into another area and carefully merge the changes by hand. Compatibility Issues With Previous NetBSD Releases Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 1.4.1 Note Only issues effecting an upgrade from NetBSD 1.3 or NetBSD 1.3.x are decribed here. o "machine" directory/link in "/usr/include" Description Some architecture may fail to install the comp set because the /usr/include/machine directory changed to a symbolic link in NetBSD 1.4. Fix If this happens, you can use the command # rm -r /usr/include/machine to remove the old directory and it contents and reinstall the comp set. Using online NetBSD documentation Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by ``name(section)''. Some examples of this are o intro(1), o man(1), o apropros(1), o passwd(1), and o passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The man command is used to view the documentation on a topic, and is started by entering man [section] topic. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is op- tional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter man passwd to read the documentation for passwd(1). To view the documentation for passwd(5)m enter man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where subject-word is your topic of interest; a list of possibly related man pages will be displayed. Administrivia If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at majordomo@NetBSD.ORG. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: netbsd- comments@NetBSD.ORG. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports in- clude lots of details. Additionally, bug reports can be sent by mail to: netbsd-bugs@NetBSD.ORG. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses. If you're inter- ested in doing a serious amount of work on a specific port, you probably should contact the "owner" of that port (listed below). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: netbsd-help@NetBSD.ORG. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP some- where, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. Thanks go to o The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encouragement. o Also, our thanks go to: Mike Hibler Rick Macklem Jan-Simon Pendry Chris Torek for answering lots of questions, fixing bugs, and doing the various work they've done. o UC Berkeley's Experimental Computing Facility provided a home for sun-lamp in the past, people to look after it, and a sense of humor. Rob Robertson, too, has added his unique sense of humor to things, and for a long time provided the primary FTP site for NetBSD. o Vixie Enterprises for hosting the NetBSD FTP and SUP server. o Redback Networks, Inc. for hosting the NetBSD Mail server. o Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. o Dave Burgess burgess@cynjut.infonet.net has been maintaining the 386BSD/NetBSD/FreeBSD FAQ for quite some time, and deserves to be recognized for it. o The following individuals and organiztions (each in alphabetical or- der) have made donations or loans of hardware and/or money, to sup- port NetBSD development, and deserve credit for it: Jason Birnschein Jason Brazile David Brownlee Simon Burge Dave Burgess Ralph Campbell Brian Carlstrom James Chacon Bill Coldwell Charles Conn Tom Coulter Charles D. Cranor Christopher G. Demetriou Scott Ellis Hubert Feyrer Greg Gingerich Guenther Grau Ross Harvey Charles M. Hannum Michael L. Hitch Jordan K. Hubbard Scott Kaplan Noah M. Keiserman Chris Legrow Neil J. McRae Perry E. Metzger Herb Peyerl Mike Price Thor Lancelot Simon Bill Sommerfeld Paul Southworth Ted Spradley Kimmo Suominen Jason R. Thorpe Steve Wadlow Advanced System Products, Inc. Avalon Computer Systems Bay Area Internet Solutions Canada Connect Corporation Demon Internet, UK Digital Equipment Corporation Easynet, UK Free Hardware Foundation Innovation Development Enterprises of America Internet Software Consortium MS Macro System GmbH, Germany Numerical Aerospace Simulation Facility, NASA Ames Research Center Piermont Information Systems Inc. VMC Harald Frank, Germany (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) o Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to mentioned, tell us!) We are... (in alphabetical order) The NetBSD core group: Paul Kranenburg pk@NetBSD.ORG Scott Reynolds scottr@NetBSD.ORG Christos Zoulas christos@NetBSD.ORG The portmasters (and their ports): Mark Brinicombe mark@NetBSD.ORG arm32 Jeremy Cooper jeremy@NetBSD.ORG sun3x Ross Harvey ross@NetBSD.ORG alpha Ignatios Souvatzis is@NetBSD.ORG amiga Eduardo Horvath eeh@NetBSD.ORG sparc64 Paul Kranenburg pk@NetBSD.ORG sparc Anders Magnusson ragge@NetBSD.ORG vax Tsubai Masanari tsubai@NetBSD.ORG macppc Tsubai Masanari tsubai@NetBSD.ORG newsmips Minoura Makoto minoura@NetBSD.ORG x68k Phil Nelson phil@NetBSD.ORG pc532 Scott Reynolds scottr@NetBSD.ORG mac68k Darrin Jewell dbj@NetBSD.ORG next68k Gordon Ross gwr@NetBSD.ORG sun3, sun3x Kazuki Sakamoto sakamoto@NetBSD.ORG bebox Wolfgang Solfrank ws@NetBSD.ORG powerpc Jonathan Stone jonathan@NetBSD.ORG pmax Jason Thorpe thorpej@NetBSD.ORG hp300 Frank van der Linden fvdl@NetBSD.ORG i386 Leo Weppelman leo@NetBSD.ORG atari Steve Woodford scw@NetBSD.ORG mvme68k The NetBSD 1.4.1 Release Engineering team: Ted Lemon mellon@NetBSD.ORG Perry Metzger perry@NetBSD.ORG Curt Sampson cjs@NetBSD.ORG Developers and other contributors: Steve Allen wormey@NetBSD.ORG Lennart Augustsson augustss@NetBSD.ORG Christoph Badura bad@NetBSD.ORG Manuel Bouyer bouyer@NetBSD.ORG Robert V. Baron rvb@NetBSD.ORG John Brezak brezak@NetBSD.ORG Allen Briggs briggs@NetBSD.ORG Aaron Brown abrown@NetBSD.ORG David Brownlee abs@NetBSD.ORG Simon Burge simonb@NetBSD.ORG Dave Burgess burgess@cynjut.infonet.net Dave Carrel carrel@NetBSD.ORG Bill Coldwell billc@NetBSD.ORG Chuck Cranor chuck@NetBSD.ORG Alistair Crooks agc@NetBSD.ORG Aidan Cully aidan@NetBSD.ORG Rob Deker deker@NetBSD.ORG Chris G. Demetriou cgd@NetBSD.ORG Matthias Drochner drochner@NetBSD.ORG Enami Tsugutomo enami@NetBSD.ORG Bernd Ernesti veego@NetBSD.ORG Erik Fair fair@NetBSD.ORG Hubert Feyrer hubertf@NetBSD.ORG Thorsten Frueauf frueauf@NetBSD.ORG Brian R. Gaeke brg@dgate.org Thomas Gerner thomas@NetBSD.ORG Justin Gibbs gibbs@NetBSD.ORG Adam Glass glass@NetBSD.ORG Michael Graff explorer@NetBSD.ORG Brad Grantham grantham@tenon.com Matthew Green mrg@NetBSD.ORG Juergen Hannken-Illjes hannken@NetBSD.ORG Charles M. Hannum mycroft@NetBSD.ORG Eric Haszlakiewicz erh@NetBSD.ORG Michael L. Hitch osymh@NetBSD.ORG Christian E. Hopps chopps@NetBSD.ORG Ken Hornstein kenh@NetBSD.ORG Marc Horowitz marc@NetBSD.ORG ITOH Yasufumi itohy@NetBSD.ORG Matthew Jacob mjacob@NetBSD.ORG Lonhyn T. Jasinskyj lonhyn@NetBSD.ORG Darrin Jewell dbj@NetBSD.ORG Lawrence Kesteloot kesteloo@cs.unc.edu Klaus Klein kleink@NetBSD.ORG John Kohl jtk@NetBSD.ORG Kevin Lahey kml@NetBSD.ORG Ted Lemon mellon@NetBSD.ORG Mike Long mikel@NetBSD.ORG Paul Mackerras paulus@NetBSD.ORG Neil J. McRae neil@NetBSD.ORG Perry Metzger perry@NetBSD.ORG Luke Mewburn lukem@NetBSD.ORG der Mouse mouse@NetBSD.ORG Tohru Nishimura nisimura@NetBSD.ORG Masaru Oki oki@NetBSD.ORG Greg Oster oster@NetBSD.ORG Herb Peyerl hpeyerl@NetBSD.ORG Matthias Pfaller matthias@NetBSD.ORG Dante Profeta dante@NetBSD.ORG Chris Provenzano proven@NetBSD.ORG Darren Reed darrenr@NetBSD.ORG Tim Rightnour garbled@NetBSD.ORG Heiko W. Rupp hwr@NetBSD.ORG SAITOH Masanobu msaitoh@NetBSD.ORG Kazuki Sakamoto sakamoto@NetBSD.ORG Curt Sampson cjs@NetBSD.ORG Wilfredo Sanchez wsanchez@NetBSD.ORG Ty Sarna tsarna@NetBSD.ORG Matthias Scheler tron@NetBSD.ORG Karl Schilke (rAT) rat@NetBSD.ORG Tim Shepard shep@NetBSD.ORG Chuck Silvers chs@NetBSD.ORG Thor Lancelot Simon tls@NetBSD.ORG Noriyuki Soda soda@NetBSD.ORG Wolfgang Solfrank ws@NetBSD.ORG Bill Sommerfeld sommerfeld@NetBSD.ORG Ignatios Souvatzis is@NetBSD.ORG Bill Studenmund wrstuden@NetBSD.ORG Kevin Sullivan sullivan@NetBSD.ORG Kimmo Suominen kim@NetBSD.ORG Matt Thomas matt@NetBSD.ORG Jason Thorpe thorpej@NetBSD.ORG Christoph Toshok toshok@NetBSD.ORG Todd Vierling tv@NetBSD.ORG Paul Vixie vixie@NetBSD.ORG Krister Walfridsson kristerw@NetBSD.ORG Nathan Williams nathanw@NetBSD.ORG Colin Wood ender@NetBSD.ORG Legal Mumbo-Jumbo The following notices are required to satisfy the license terms of the software that we have mentioned in this document: This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the Computer Systems Engi- neering Group at Lawrence Berkeley Laboratory. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by Adam Glass and Charles Han- num. This product includes software developed by Adam Glass. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Charles D. Cranor and Wash- ington University. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum, by the Uni- versity of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum. This product includes software developed by Chris Provenzano. This product includes software developed by Christian E. Hopps. This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by David Jones and Gordon Ross. This product includes software developed by Dean Huxley. This product includes software developed by Eric S. Hvozda. This product includes software developed by Ezra Story. This product includes software developed by Gordon Ross. This product includes software developed by Gordon W. Ross and Leo Wep- pelman. This product includes software developed by Gordon W. Ross. This product includes software developed by Herb Peyerl. This product includes software developed by Ian W. Dall. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Jason R. Thorpe for And Com- munications, http://www.and.com/. This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by John Polstra. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Julian Highfield. This product includes software developed by Kenneth Stailey. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Mark Brinicombe. This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matthias Pfaller. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Peter Galbavy. This product includes software developed by Philip A. Nelson. This product includes software developed by Rodney W. Grimes. This product includes software developed by Scott Bartram. This product includes software developed by SigmaSoft, Th. Lockert. This product includes software developed by Terrence R. Lambert. This product includes software developed by Theo de Raadt and John Brezak. This product includes software developed by Theo de Raadt. This product includes software developed by TooLs GmbH. This product includes software developed by Winning Strategies, Inc. This product includes software developed by the Center for Software Sci- ence at the University of Utah. This product includes software developed by the University of Calgary De- partment of Computer Science and its contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed for the FreeBSD project. This product includes software developed for the Internet Software Con- sortium by Ted Lemon. This product includes software developed for the NetBSD Project by Frank van der Linden. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Matthieu Herrb. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Pier- mont Information Systems Inc. This product includes software developed for the NetBSD Project by Ted Lemon. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed at Ludd, University of Lule}, Sweden. This product includes software developed by Gordon W. Ross. This product includes software developed by Ben Harris. This product includes software developed by Adam Glass, David Jones, and Gordon Ross. NetBSD 23 March 1999 29