
0. WARNING!

  Since version 1.5.4 of the Cistron RADIUS server the `clients'
  file has been broken up into 2 seperate files: `clients' and `naslist'.
  See 4a. and 4b. !!

1. INTRO

  This is version 1.5.4.3 of the Cistron Radius daemon. Most of
  the code was taken from radius-1.16 by Livingston Enterprises,
  available from ftp.livingston.com.

  The server is mostly compatible with livingston radiusd-2.01
  (no menus or s/key support though) but with more feautures, such as:

    o Can limit max. number of simultaneous logins on a per-user basis!
    o Multiple DEFAULT entries, that can optionally fall-through.
    o In fact, every entry can fall-through
    o Deny/permit access based on huntgroup users dials into
    o Set certain parameters (such as static IP address) based on huntgroup
    o Extra "hints" file that can select SLIP/PPP/rlogin based on
      username pattern (Puser or user.ppp is PPP, plain "user" is rlogin etc).
    o Can execute an external program when user has authenticated (for example
      to run a sendmail queue).
    o Can use `$INCLUDE filename' in users and dictionary files
    o No good documentation at all, just like the original radiusd 1.16!

  Work on real manual pages is progressing slowly. For a large part you
  can use the documentation of the Livingston 2.01 server. Just remember
  that using Prefix and Suffix in both the "users" and the (cistron-radiusd
  specific) "hints" file will give unpredictable results. Well actually
  it will result in Prefix and Suffix probably not working in the "users"
  file if you already stripped them off in the "hints" file.

  The documentation of the Livingston server is available on the web at:
  http://www.livingston.com/Tech/Docs/RADIUS/guide/

  Extra command line flags:
  o -y: log all login attempts in /var/log/radius.log, include (wrong)
        password for failed logins.
  o -z: log the password of successful logins too (STRONLY discouraged).

2. COMPILE

  Ignore this section (2) if you have a pre-installed binary package.

  You will need to:

  o Edit src/conf.h to adjust the paths for the logfiles.
  o Edit src/Makefile
    Defines:  DBM             DBM support
              NDBM            NDBM support (mutually exclusive)
                              NOTE: at the moment DBM/NDBM support doesn't work
              NOSHADOW        Don't compile in shadow support
              NT_DOMAIN_HACK  Strip first part of NT_DOMAIN\loginname
              NOCASE          Dictionary file is case insensitive

  o Copy the examples in raddb to /etc/raddb and edit+rename the sample files.
  o If you have a Debian system, you might want to install rc.radiusd
    as /etc/init.d/radiusd and install startup symlinks with
    "update-rc.d radiusd defaults".
  o If you use rc.radiusd, also install radwatch in /usr/local/sbin.
  o Start radiusd (using /etc/init.d/radiusd start if applicable).

3. USAGE

  You can use last -f /var/log/radwtmp to get last info on all users.
  You can use "radwho" at any time to find out who's logged in.
  If you want, you can install "radwho" as /usr/sbin/in.fingerd.
  Also, the "raduse" program can be very useful to monitor your modem pool.

4. CONFIGURATION FILES

  For every file there is a fully commented example file included, that
  explains what is does and how to use it. Read those sample files too!

4a. CLIENTS

  Make sure the clients (portmasters, Linux with portslave etc) are set up to
  use the host radiusd is running on as authentication and accounting host.
  Configure these clients to use a "radius secret password". For every client,
  also enter this "secret password" into the file /etc/raddb/clients.
  See also the manual page for clients(5rad).

4b. NASLIST

  Every NAS (Network Access Server, also known as terminal server) should have
  an entry in this file with an abbreviated name and the type of NAS it is
  (Cisco, Livingston or Portslave). Usually this is the same list as in the
  "clients" file, but not every NAS is a client and not every client is a NAS
  (this will start to make sense if you use radius proxy servers).

4c. NASPASSWD

  If ``checkrad'' needs to login on your terminal server to check who
  is online on a certain port (i.e. it's not possible to use SNMP or
  finger) you need to define a loginname and password here.

  This is normally ONLY needed for USR/3Com Total Control terminal servers!

4c. HINTS

  Customize the /etc/raddb/hints file. This file is used to give users a
  different login type based on a prefix/suffix of their loginname. For
  example, logging in as "user" may result in a rlogin session to a Unix
  system, and logging in as "Puser" could start a PPP session.

4d. HUNTGROUPS

  This is the /etc/raddb/huntgroups file. Here you can define different
  huntgroups. These can be used to:

    - restrict access to certain huntgroups to certain users/groups of
      users (define this in the huntgroups file itself)
    - match a loginname with a huntgroup in /etc/raddb/users. One use
      for this is to give a user a static IP address based on the
      huntgroup / Point of Presence  (s)he dials in to.

4e. USERS

  With the original RADIUS server, every user had to be defined in this
  file. There could be one default entry, where you could for example
  define that a user not in the radius file would be checked agains the
  UNIX password file and on succesfull login would get a PPP connection.

  In the new style file, you can define multiple DEFAULT entries. All
  entries are processed in the order as they appear in the users file.
  If an entry matches the username, radiusd will stop scanning the users
  file unless the attribute "Fall-Through = Yes" is set.

  You can uses spaces in usernames by escaping them with \ or by using
  quotes. For example, "joe user" or joe\ user.

  The Cistron Radiusd does not trim any spaces from a username received
  from the portmaster (livingston does, in perl notation, $user =~ s/\s+.*//;)

4f. NEW RADIUS ATTRIBUTES (to be used in the USERS file).

  Name			Type		Descr.
  ----			----		------
  Simultaneous-Use	integer		Max. number of concurrent logins
  Fall-Through		integer		Yes/No
  Exec-Program		string		program to execute after authentication
  Exec-Program-Wait	string		ditto, but wait for program to finish
  					before sending back auth. reply

  Exec-Program can take arguments. You can use macros in the arguments:

    %p   Port number
    %n   NAS IP address
    %f   Framed IP address
    %u   User name
    %a   Protocol (SLIP/PPP)
    %s   Speed (connect string - eg "28800/V42.BIS")

  For example, use the following entry for someone who has BSMTP (queued
  SMTP) service. "brunq" is the program that runs the SMTP queue.

  robert	Service-Type = Framed-User
  		Exec-Program = "/usr/local/sbin/brunq -h %f delta",
  		Fall-Through = 1

  If Exec-Program-Wait returns a non-zero exit status, access will be
  denied to the user. If the external program printed something on its
  standard output, this will be sent along with the rejection as Port-Message.

5. LOG FILES

5a. /var/log/radutmp

  In this file the currently logged in users are held. The program "radwho"
  reads this file and gives you a summary. Rogue sessions can be deleted
  from this file with the "radzap" program.

5b. /var/log/radwtmp

  This file is "wtmp" compatible and keeps a history of all radius logins/
  logouts. This file can be read with the "last" program, and other Unix
  accounting programs (such as "ac" and "sac") can be used to produce a
  summary.

5c. /var/log/radius.log

  All RADIUS informational. diagnostic and error messages are logged in
  this file.  If radiusd has been started with the "-y" flag, all logins
  attempts will be logged in this file. For failed logins, the wrong password
  will also be logged.  With the "-z" flag, the passwords for successful
  logins will be logged as well. That's pretty dangerous though in case
  anyone unpriviliged ever manages to get access to this file!

5d. /var/log/radacct/<terminal_server>/detail

  This is the original radius logfile, as written by all the livingston
  radius servers. It's only created if the directory /var/log/radacct exists.
  The <terminal_server> name is the short name if one is defined in
  /etc/raddb/naslist.

6.  MORE INFO, SUPPORT

  I know that the documentation provided is sparse. However it is not in
  the scope of the radius server to provide a guide as to how terminal
  servers works and how the RADIUS protocol works and is used.

  Unfortunately I do not have too much time myself to answer all questions
  that might arise through email - you can always try sending me email,
  ofcourse, but I cannot guarantee a reply, depends on how much time I have.

  There are a few mailing lists that might offer some help:

  There is a majordomo mailing list hosted by Cistron Internet Services. Send
  a message with "help" in the body to cistron-radius-request@info.cistron.nl.

  You can also try the the linux-isp mailing list, which on a lot of sites
  used to be accessible as the newsgroup linux.admin.isp (not anymore).
  For the mailing list, send a message with "help" in the body to
  linuxisp-request@friendly.jeffnet.org. Several people on that list are
  successfully using this software.

  There is a linux-radius list run by miguel a.l. paraz <map@iphil.net>.
  See http://www.iphil.net/~map/radius/ for details.

  Then ofcourse for general RADIUS questions, especially if you are using
  Livingston  / Lucent RABU equipment, there is the portmaster-radius mailing
  list. Send mail to portmaster-radius-request@livingston.com to find
  out how to subscribe.


   README 1.5.4.3  Miquel van Smoorenburg <miquels@cistron.nl>  06-Jul-1998

