+-----------------------------------------+
| MP2 I2C Firmware Release Notes - RAVEN2X
+---------------------------------------------------------------------------------------------
| Version 1.2.0
+---------------------------------------------------------------------------------------------
|   * Date (dd/mm/yy)
|          09/03/18
|
|   * The MP2 I2C firmware is enabled for Picasso Platform with S0i2 and S0i3 support
|     The firmware shall support Touch Pad, NFC Devices and certain Touch Panel device
|     connected with I2C0 and I2C1
|
|   * Features enabled
|              - Enable I2C Read/Write for devices connected with i2c0,1
|              - Max Read supported 2k bytes
|              - Max write supported 32 bytes
|              - Add Support for NFC and Touch Pad on I2Cx
|              - Add MP2 Diag Support
|              - Read DRAM data in the main thread instead of Interrupt Thread
|              - Add Lock after each 32 byte read and write
|              - MP2 I2C PCIe Device Id 0x15E6.
|              - MP2 Deep Sleep (48Mhz)
|              - MP2 S0i2 support (Available and Disabled)
|
|   * Change:
|              - PLAT-28199 : [RV2X][MP2]See MP2 mailbox registers couldn't be accessed from host
|              - Git Change-Id: I827b3331c26db8551b1f218a498d17fa6352f049
|              - Gerrit ID: 135791
|              - Commit Id: bae849be50145e551dbaf6a9f82e91e566c34380
|   * Limitation
|
+---------------------------------------------------------------------------------------------
| Version 1.2.1
+---------------------------------------------------------------------------------------------
|   * Date (dd/mm/yy)
|          23/04/18
|
|   * Taken the changes from RV1 master branch.
|   * MP2 Reference clock is set at 200MHz on load by setting SEL_MP2CLK, SOC_CLK, SMN_CLK.
|   * Commented the preprocessor macro LP_626 in project settings to disable low power.
|   * Enabled the register C2PM12/15 in main.
|
|   * Change:
|              - PLAT-30616 : [RV2-FP5] The SFH device will lost and device ID
|                     change from 15E6 to 15E4 after running S4 or S3 test RS3.
|              - Git Change-Id:  I5da0fc644c457b039936027115e707bf5b65b303
|              - Gerrit ID: 144325
|              - Commit Id: 21508b30f7cd2562227d6bb09e235570cdfeefdb
|   * Limitation
|
+---------------------------------------------------------------------------------------------
| Version 1.2.2.0
+---------------------------------------------------------------------------------------------
|   * Date (dd/mm/yy)
|          10/07/18
|
|   * Enabled Low power i.e 48MHz support.
|   * Integrated the changes from RV1 to Rv2 for low power mode.
|
|   * Change:
|              - PLAT-33860 : [RV2] Enable Low power support
|              - Git Change-Id:  Ifb946babde6f52e02654ae5ab8a0bfcf591d07dc
|              - Gerrit ID: 160642
|              - Commit Id: 5d4ee51bb22c19369c6bec4540f90130874b5edd
|   * Limitation
|
+---------------------------------------------------------------------------------------------
| Version 1.2.2.3
+---------------------------------------------------------------------------------------------
|   * Date (dd/mm/yy)
|          10/07/18
|
|   * Enabled Low power i.e 48MHz support.
|   * Integrated the changes from RV1 to Rv2 for low power mode.
|
|   * Change:
|              - PLAT-39408 Implement MP2_FIRMWARE_FLAG as MP2 FW loading indicator
|              - Git Change-Id: I85e79f15db98a371d96381b5039c2d9fb671b8ba
|              - Gerrit ID: 188035
|              - Commit Id: 5ab5e8d269c5bbd6526f95c01324ed412a0e8f6b
|   * Limitation
|
+---------------------------------------------------------------------------------------------



